Frequently Asked Questions about PitchVision

Can pitchvision be used outdoor?

YES! PitchVision work well on any firm surface - indoor or outdoor. As a general rule of thumb, the firmer the surface the better, however a well rolled turf pitch will also be suitable. Sensor performance and the response of the ball (i.e. bounce) will be affected on soft turf or soft grass pitches or damp pitches.

Use on Windy Days: If any hanging/ wall sensors is being used outdoors care should be taken to ensure that the weather is calm with little breeze. In windy conditions the hanging sensor can act as a 'sail' - catching the wind and billowing. This can put significant stress on the net structure and could in extreme cases lead to damage of the net, sensor and injury to those around. Please exercise caution in this regard.

Does PitchVision change the way the ball bounces?

No. The sensor mat is so thin that the ball's energy transfers very efficiently to the pitch underneath it and does not reduce the bounce. The sensor also has a slightly rough surface so that the ball grips truly and does not skid or slide through. The pitch sensor is coloured green to blend in with its environment and not draw attention to itself. Most players using the system for the first time will be slightly 'conscious' of the sensor mat for the first minute but generally forget it is there altogether within 3-4 balls.

Surfaces: The pitch sensor will work well on any firm surface - indoor or outdoor. As a general rule of thumb, the firmer the surface the better, however a well rolled turf pitch will also be suitable. Sensor performance and the response of the ball (i.e. bounce) will be affected on soft turf or soft grass pitches or damp pitches.

Ball Types: has been specially designed and tuned to be used with Cricket Balls and Bowling Machine Balls only. We cannot guarantee the performance of Tennis balls and plastic training balls but these may sometimes work on very firm surfaces.

How is PitchVision Stored?

All the PitchVision sensor-mat are Folded /Rolled and packed neatly into Wheelie Bags. There is also a special Laptop bag for cables and Leads etc

The best way to maintain the sensors when storing them is to follow some simple rules:

Always use the folding foams provided
Ensure the there are no creases when folding/folded
Once folded store in the Wheelie bag or flat: do not stand on end
Store in a dry area, do not stack anything on top

How long does PitchVision take to set up

Setting up generally takes experienced users no more than 10minutes.

If your venue already has the sensors in place, then set takes only as long as it takes to turn on your laptop and log in.

Like anything new, the first few times you set up will take a little longer than when you are familiar with the process. We provide a very detailed User Manual to help guide new users through the process step by step.

How accurate is PitchVision?

PitchVision is arguably the most accurate cricket data collection system available. This is because the system uses specific impact information not calculations or estimations: The feedback is based on the exact points of impact. has also been tested against Radar-Guns and bowling machines and is generally more accurate at measuring bowler pace than either.

We certainly don't claim PitchVision is infallible - far from it, but our sensors are generally 94-99% accurate.

How easy is PitchVision to transport?

PitchVision sensors sets pack away to 1 to 3 wheelie bags depending on exactly what mix of Sensors you have:

PV-Solo 1 wheelie bag: Total Weight: 18kg
PV- Solo + 1 Wheelie bag: Total Weight: 25kg
PV-Club 2 Wheelie bags: Total Weight: 42kg
PV-Premium 3 Wheelie bags: Total Weight: 76kg

The Pitch Sensor Wheelie bag measures 75cm wide x 25cm tall x 2.10m long
The Hanging Sensor Wheelie Bags measures 55cm wide 25cm tall x 2.10m long

Each wheelie bag comes with wheels, hand straps and a strong steel base frame meaning transporting from Club rooms to nets, or to store room is a simple task requiring just 1 individual. Lifting and carrying generally requires 2 people.

For transport over long distances the length of the bags means that only 1 bag will fit into a standard car - transport of 2-3 bags therefore requires a large car, roof racks or small Van.

How Durable is PitchVision?

The sensors have been designed to Last anywhere up to 1,000,000 impacts. In a recent test using 2 bowling machines running day and night we bowled 750,000 deliveries (that's 125,000 overs!) without the sensors breaking down. In fact, try as we might, we've not actually been able to break one yet. Players can walk/jump/run on the sensors - they're made for it!

In fact, the PitchVision system is just like any other piece of sports equipment you value: Treat it well and it will last a long time; Treat it badly and it won't. In talking about 'product care' we often draw a parallel with other cricket technology that are used in and around cricket nets, - such as Bowling Machines and laptops and Cameras. You wouldn't leave a bowling machine or a camera standing in the rain; don't leave PitchVision in the rain either. In most cases just take normal precautions and common sense care rules apply.

Of Course does have some specific care requirements which are detailed in our User Guide - however our 'golden rules' that apply in all cases are as follows:

Do not crease the sensors
Do not fold the sensors - always gently roll using the rollers provided
Do not puncture
Do not wear spikes unless the Mats are specifically labelled 'spike proof'
Avoid twisting cables
Ensure the bowling crease mat is firmly in place and doesn't slip (*very important for safety)
Don't lay the Pitch sensor on a damp or wet surface.
Don't use the system in the rain
Pack away carefully and store in a dry place